T30 DJl Plant Protection Drone
Classification :
DJI Plant Protection Drone
PRODUCT DETAILS
Keywords:
T30 DJl Plant Protection Drone
Aircraft Parameters
- Overall Weight: 26.3 kg (excluding battery), 36.5 kg (including battery).
- Maximum Takeoff Weight: Maximum spraying takeoff weight is 66.5 kg (near sea level), and maximum spreading takeoff weight is 78 kg (near sea level).
- Maximum Wheelbase: 2145 mm.
- Dimensions: 2858 mm×2685 mm×790 mm (arms unfolded, propellers unfolded); 2030 mm×1866 mm×790 mm (arms unfolded, propellers folded); 1170 mm×670 mm×857 mm (arms folded).
- Hovering Accuracy: When D - RTK is enabled, it is ±10 cm horizontally and ±10 cm vertically; when D - RTK is not enabled, it is ±0.6 m horizontally and ±0.3 m vertically (±0.1 m when the radar function is enabled).
- Maximum Configurable Flight Radius: 2000 m.
- Maximum Pitching Angle: 15°.
- Maximum Operating Flight Speed: 7 m/s.
- Maximum Level Flight Speed: 10 m/s (when the GNSS signal is good).
- Maximum Withstandable Wind Speed: 6 m/s.
- Maximum Flight Altitude: 4500 m.
- Recommended Working Environment Humidity: < 93%.
- Recommended Working Environment Temperature: 0 ℃ - 45 ℃.
Power System
- Motor: Stator size is 100×18 mm, KV value is 77 rpm/V, maximum power is 3600 W/rotor, and maximum pull is 18.7 kg/rotor.
- Propellers: The diameter×pitch is 38×20 inch, and the weight of a single propeller is 106 g.
- Electronic Speed Controller: The maximum continuous working current is 60 A, and the maximum working voltage is 60.9 V (14S LiPo).
Spraying System
- Operation Tank: The operation tank has a volume of 30 L and an operation load of 30 kg.
- Pump: It adopts a horizontal opposed six - cylinder double - plunger pump design. The working voltage is 60 V, and the maximum flow rate is 4 L/min×2.
- Nozzles: There are 16 nozzles. The standard nozzle model is SX11001VS, and the optional nozzle models are SX110015VS and TX - VK04 for fruit tree machines.
- SX11001VS: The maximum spraying flow rate is 7.2 L/min, and the atomization particle size is 130 - 250 μm.
- SX110015VS: The maximum spraying flow rate is 8 L/min, and the atomization particle size is 170 - 265 μm.
- TX - VK04: The maximum spraying flow rate is 3.6 L/min, and the atomization particle size is 110 - 135 μm.
- Maximum Effective Spraying Width: 4 - 9 m (12 nozzles, about 1.5 - 3 m away from the crop).
Battery and Charging Details
- Battery: Model BAX501 - 29000mAh - 51.8V, with a weight of about 10.2 kg, a capacity of 29000 mAh, a voltage of 51.8 V, and a protection level of IP54+board - level potting protection. The battery has 1000 guaranteed cycles within the warranty period.
- Charging:
- T30 Intelligent Charging Butler: With a charging power of 7200 W, it has a standby power system and dual - channel alternate charging. It can achieve a super - fast charge in 10 minutes, and the power is self - adaptive for safer charging.
- D9000i All - in - One Variable - Frequency Charging Station: It can output 7200 W DC, has a 25 - liter fuel tank, and can also output 220 V AC. It is both a charger and a generator, with dual - channel alternate charging, integrated design, and one - key electric start.
CUSTOMER VISIT
HONOR CERTIFICATE
RELATED PRODUCTS
GET A FREE QUOTE
