T25 DJl Plant Protection Drone

Classification :

DJI Plant Protection Drone

PRODUCT DETAILS

Keywords:

T25 DJl Plant Protection Drone

Aircraft Parameters

  • Overall Weight: 25.4 kg (excluding battery), 32 kg (including battery).
  • Maximum Takeoff Weight: Maximum spraying takeoff weight is 52 kg (near sea level), and maximum spreading takeoff weight is 58 kg (near sea level).
  • Maximum Wheelbase: 1925 mm.
  • Dimensions:
    • Spraying Configuration: When the arms and propellers are unfolded, it is 2585×2675×780 mm; when the arms are unfolded and the propellers are folded, it is 1475×1540×780 mm; when the arms and propellers are folded, it is 1050×690×820 mm.
    • Spreading Configuration: When the arms and propellers are unfolded, it is 2585×2675×795 mm; when the arms are unfolded and the propellers are folded, it is 1475×1540×795 mm; when the arms and propellers are folded, it is 1050×690×820 mm.
  • Hovering Accuracy: When RTK positioning is enabled, it is ±10 cm horizontally and ±10 cm vertically; when RTK positioning is not enabled, it is ±60 cm horizontally and ±30 cm vertically (±10 cm when the radar function is enabled).
  • Maximum Configurable Flight Radius: 2000 m.
  • Maximum Withstandable Wind Speed: 6 m/s.

Power System

  • Motor: Stator size is 100×28 mm, motor KV value is 59 rpm/V, and motor power is 4600 W/rotor.
  • Propellers: Made of nylon carbon fiber, with a paddle size of 50 inches, a main rotor diameter of 1270 mm, and the number of rotors is 4.

Spraying System

  • Operation Tank: The operation tank has a volume of 20 L and an operation load of 20 kg.
  • Water Pump: It is an impeller pump (magnetic drive). There are 2 pumps, with a single - pump flow range of 0 - 12 L/min. The maximum flow rate is 16 L/min (for 2 nozzles) and 24 L/min (for 4 nozzles).
  • Nozzles: The nozzle model is LX8060SZ, and the number of nozzles is 2. The nozzle spacing is 1368 mm (rear spray bar). The atomization particle size is 50 - 500 μm, and the effective spray width range is 4 - 7 m (relative to an operation height of 3 m).

Battery and Charging Details

  • Battery: Model DB800 intelligent flight battery (BAX702 - 15500mAh - 52.22V), with a weight of about 6.6 kg, a capacity of 15.5 Ah, and a voltage of 52.22 V.
  • Charging: The D6000i all - in - one variable - frequency charging station can output DC 42 - 59.92V/4500W and AC 220V/1500W. It takes 9 - 12 minutes to fully charge a battery. The C8000 intelligent charging has a charger model of CHX101 - 7000, with an input voltage of 100 - 240 Vac, an output voltage of 59.92V, and a maximum output current of 100A max, and it also takes 9 - 12 minutes to fully charge a battery.

CUSTOMER VISIT

Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit
Customer visit

HONOR CERTIFICATE

Honor
Honor
Honor
Honor
Honor
Honor

GET A FREE QUOTE